FSP200
7
Tempo Communications Inc.
1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
Important Safety Information
(cont’d)
Battery safety:
•
Do not allow anything to contact the battery terminals.
• Do not immerse batteries in liquid. Liquid may create a short circuit and damage the battery.
If batteries are immersed, contact your service center for proper handling.
•
Do not place the battery into a pocket, tool pouch, or tool box with conductive objects.
Conductive objects may create a short circuit and damage the battery.
• Do not place a battery on moist ground or grass. Moisture may create a short circuit and
damage the battery.
• Do not store the battery at more than 122 °F (50 °C) or less than –4 °F (–20 °C). Damage to
the battery can result.
•
Do not use another manufacturer’s charger. Other manufacturers’ chargers may overcharge
and damage the battery.
• Do not attempt to open the battery. It contains no user-serviceable parts.
Failure to observe these precautions may result in injury and may damage the unit.
• Do not store tool in areas of extremely high temperature and humidity.
• Do not touch protection sleeve or tube heater during or immediately after heating. These
surfaces are very hot and touching them may result in burns.
•
Do not place tool in an unstable or unbalanced position. Tool may shift or lose balance,
causing unit to fall.
•
This tool is precision adjusted and aligned. Do not allow unit to receive a strong shock or
impact. Use supplied carrying case for transportation and storage. Carrying case protects
tool from damage, moisture, vibration, and shock.
Failure to observe these precautions may result in injury and may damage the unit.
Follow these instructions for handling electrodes:
•
Use only specified electrodes.
•
Set new electrodes in correct position.
• Replace electrodes as a pair.
Failure to observe this precaution may cause abnormal arc discharge, which may result in
equipment damage or degradation in splicing performance.
