EuroFlow EF and EF/B
Biological Safety Cabinet
UM-EFAB-EN10.doc
8
2
Safety
2.1
Use in conformity with regulations
Personnel that is not properly informed about the safety regulation and/or does not meet the
requirements mentioned in
§2.3 Authorized persons
, is not allowed to use the cabinet.
Improper use of the cabinet is not allowed.
2.2
Modifications and changes to the installation
In order to operate the installation safely changes and/or alterations shall only be made by Clean
Air Techniek B.V., or shall be made after consultation with and permission in writing from Clean Air
Techniek. If modifications and changes are made on own initiative, without permission from Clean
Air Techniek B.V., the parts of the installation concerned are no longer covered by the warranty.
Clean Air Techniek B.V. cannot be held liable for the consequences of the modifications and the
dangers, which might possibly occur as a result. The modifications mentioned here include the
connection of the installation to an exhaust system.
2.3
Authorized persons
Operating the installation
The cabinet shall only be used by personnel which:
•
is familiar with the content, regulations and warnings which are mentioned in this operating
manual;
•
is familiar with how to operate the cabinet;
•
is familiar with the start up procedure, the stop procedure and Knows how to react in case of
emergency;
•
is familiar with the regulations to keep the safety in all circumstances;
•
is capable to end a disturbance.
Maintenance and repair general
Maintenance shall only be performed by professional service engineers, who are sufficiently trained
by Clean Air Techniek B.V. to:
•
Estimate and avoid the dangers of the installation;
•
Estimate the consequences of their actions.
•
Before starting maintenance to the installation (mechanical and/or electric) disconnect the
power supply. Pay attention to rotating parts, after switching off the installation the fans will
still rotate for a while.
Maintenance and repair of the electrical installation
Maintenance shall only be performed by professional electro-technical service engineers, who are
sufficiently trained by Clean Air Techniek B.V. when:
•
They can estimate and avoid the dangers of the installation;
•
They can estimate the consequences of their actions;
