EuroFlow EF and EF/B
Biological Safety Cabinet
UM-EFAB-EN10.doc
11
3
Installation
GENERAL DANGER
Be careful: high centre of gravity, crossover point.
Never hinge the window, as long as the cabinet is
not placed on the support frame
The cabinet must be installed in a safe way. Clean Air Techniek B.V. supplies an optional support
frame, which is designed for this purpose.
When the cabinet is purchased without a support frame, it is advised to discuss the installation
with the supplier.
3.1
Assembly-instruction
The cabinet has to be placed on the support frame recommended by the supplier. The assembly
needs to be done as specified in instruction underneath.
Assembly support frame
Build the support frame (see
Appendix I: Support frames EF & EF/B on page 66
for an explaining
drawing):
•
Mount the support yoke (Pos. 1) to the reinforcement plate (Pos. 3);
•
Mount (optional) feet support (Pos. 2).
•
Item no. 6 is used to position the cabinet to the support frame (see
§3.1 Placing the cabinet on
page 11
).
Placing the cabinet
•
Place the cabinet right on the forks of a forklift truck or lifting platform;
DANGER BY INDUSTRIAL VEHICLE
Be careful: Make sure the cabinet cannot slide from
the forks.
•
Move the cabinet to the correct height and position, perform this action as precise as possible
above the support frame;
•
The weight must be equally divided between the both forks and the cabinet must be horizontal
levelled;
•
The cabinet should be aligned with the covers of the support frame.
The two cones on top of the yokes will help aligning;
•
Mount the cabinet to the support frame by means of the four inner hexagonal cylinder screws
M8x12 (Pos. 6). See
Appendix I: Support frames EF & EF/B on page 66
;
•
Connect the wire to a grounded socket that is easy accessible.
