Eclipse 8/ 16/ 32 Series - Engineer Programming Manual
10
2.5. General Information for Operation with LED8/ 16A
LED8/ 16A are a compact size keyboards with LED display, suitable for management and programming of ECLIPSE
Series control panels. The keyboards have indication for 8/ 16 zones and can control one 1/ 3 area.
LED8/ 16A are equipped with specialized LED indication for informing the installer of the set programming style menu
and specific visualization of the programming values and parameters.
The entering of codes, 3- and 4-digit addresses and values is with the digit buttons. For arming the system are used
the quick buttons for the respective arming mode.
Specialized LED indication for LED8/ 16A keyboard:
LED
Indication Description
Lights on
The system is in engineer or manager programming mode.
Blinking
Shows a selected device in an engineer programming mode.
Lights on
The 3-digit programming style type is selected.
View mode (of OPERATION number) after pressing the DISARM button.
[O] is short from OPERATION.
Lights on
The 4-digit programming style type is selected.
View mode (of ADDRESS number) after pressing the DISARM button.
[A] is short from ADDRESS.
Lights on
The system waits for entering of setting of a parameter, or option.
[V] is short from VALUE.
Lights off
No active alarms in the system.
Lights on
Alarm in the system. The active alarms are reviewed by pressing the ENTER button.
Blinking
View mode for active alarms.
Lights off
No system troubles in the system.
Lights on
System trouble. The active troubles are reviewed by pressing the ENTER button.
Blinking
View mode for system troubles.
Lights off
No bypassed zones in the system.
Lights on
Bypassed zones in the system. The zone numbers are reviewed by pressing the ENTER button.
Blinking
View mode
– The numbers of bypassed zones are lighting on.
In normal operation mode the DISARM button (LED8) or Area Letters (LED 16A) light on in green. The DISARM button
has a specific functionality in engineer programming menus.
Note: The button DISARM
used in the previous design of the keyboard and has the same functionality!
Button
Functionality
Description
DISARM
System disarming.
INFORMATION
Information about the ADDRESS number in engineer programming mode. The
functionality is useful when the installer is confused during the engineer programming
and wants to check up the current ADDRESS number before continue with the
respective parameter or option settings.
The button is used in the following way:
1.
The symbols
and are lighting on permanently together with a number of
zone(s), according the type of the programmed parameter. A blinking digit shows that
parameter which is in setting mode, and lighting on digit button shows the current set
value for this parameter.
2.
To find out what is the number of the current ADDRESS, press the
button. If
the set programming style is with 4-digit ADDRESSES
– the symbol lights on, and if it
is with 3-digit operations - the
symbol lights on. The zone numbers from 1 to 4 or
