26
PRISM Field Upgrade Kit Instructions
g.
Push the
ENTER
button to confirm the selection.
NOTE.
The dot will appear at the left of the second line to indicate that the
format was selected.
h.
Push the
BACK
button to exit FORMAT mode.
5.
Select the 100% Color Bars signal using the following steps:
a.
On the TG8000, push the front-panel
BARS
test signal button.
b.
Use the left (◄) or right (►) arrow button, or push the
BARS
test signal
button repeatedly to select 100% Color Bars.
NOTE.
100% Color Bars is the factory default signal.
6.
Configure the SDI input using the following steps:
a.
Touch the
Settings
icon (
) to open the Settings menu.
b.
Select
Inputs
to open the Inputs submenu.
Figure 34: Settings menu
Summary of Contents for PRISM MPI-UP PHY-12G
Page 12: ......
