22
PRISM Field Upgrade Kit Instructions
CAUTION.
After the instrument has started the upgrade process, DO NO
remove power from the instrument. If you do so, the instrument flash will
be corrupted. The instrument will have to be sent to a Telestream factory
service center to have the system firmware restored.
NOTE.
If power to the instrument is lost before it begins erasing the
internal flash, you can restart the firmware upgrade after the instrument
reboots.
Upgrade the Firmware
1.
Copy the upgrade file with a .bin file extension from the upgrade
package onto a USB memory device. You need approximately 1 GB of
available space on the USB device.
NOTE.
If the upgrade package included a readme.txt file, read the file before
performing the upgrade. The file contains important information about the
firmware release.
2.
Insert the USB memory device into a USB port on the PRISM
monitor.
3.
On the PRISM monitor, select the
Settings
icon (
) to open the
Settings menu.
4.
Select
Utilities
to open the Utilities submenu.
5.
Select
Firmware Upgrade
. After the USB device has been
scanned, the display lists all of the files on the USB device with
a .bin file extension.
6.
Select the file in the list, and then select
Install
to start the
upgrade. (See
Figure 29: Selecting the firmware upgrade file
Summary of Contents for PRISM MPI-UP PHY-12G
Page 12: ......
