Telestream PRISM MPI-UP PHY-12G, Field Upgrade Instructions

Page: 14 / 40

2 PRISM Field Upgrade Kit Instructions
MPI hardware upgrades
These instructions are for personnel who are familiar with servicing the product.
Contact your nearest Telestream Video Products Service Center or Telestream
Factory Service for installation assistance.
WARNING. Dangerous voltages may be present. To prevent electrical shock,
disconnect the power cord from the unit before starting the upgrade procedure.
Failure to do so could cause serious injury or death.
CAUTION. Many components within the instrument are susceptible to static-
static discharge damage. To prevent static discharge damage, service the
product only in a static-free environment. Observe standard handling
precautions for static-sensitive devices while installing this kit. Always wear a
grounded wrist strap, grounded foot strap, and static resistant apparel while
installing this kit.
Recommended tool list
Table 1: Recommended tool list
Name Description
9/16 inch socket nut driver Used to removed BNC nuts.
Screwdriver handle Accepts Torx-driver bits
T-10 TORX tip Used for removing instrument screws.
TORX-driver bit for T-10 size screw heads.
Torque driver Used to apply precisely a specific torque to
a fastener.