PRISM Field Upgrade Kit Instructions
11
Upgrade the PRISM MPX Eye mezzanine board
Complete the following steps to remove the old mezzanine board from the
instrument and install the new Eye mezzanine board:
1.
Set the instrument so that the bottom is down on a static-free surface.
2.
Remove the top cover as follows:
a.
Use a TORX-driver with a T-10 TORX tip to remove the eighteen screws
securing the cover to the instrument.
b.
Lift the cover up to remove it from the instrument and set it aside.
Figure 12: Remove the top cover
Summary of Contents for PRISM MPI-UP PHY-12G
Page 12: ......
