Telenetics V.3600 Series, User Manual

Page: 234 / 273

Command Index and Defaults
E-30 V.3600
Factory Option Set # 8
(Synchronous 2-wire Leased Line Forced Answer) (AT&F8)
MODEM OPTIONS TEST OPTIONS
DCE rate - 33600 Bilateral digital loop enabled *
V.34 modulation * DTE local test disabled
V.34 rate threshold low * DTE remote test disabled
V.34 asymmetric rate disabled * Remote commanded test enabled
Forced answer * Test timeout off
Fast train disabled
Auto retrain enabled
DIAL LINE OPTIONS
SQ auto rate disabled Tone dial
Transmit clock internal Auto dial #1
Leased line, 2-wire * Wait for dial tone
Transmit level - 0 dBm* Wait delay 2 seconds
Dial backup manual * Pause delay 2 seconds
Lookback timer - 15 min * Call timeout 30 seconds *
Jack type RJ11 Answer on 1 ring
Line current disconnect long Autocallback disabled
Long space disconnect enabled
V.22 guard tone disabled
DTE OPTIONS
Sync data *
PROTOCOL OPTIONS AT command set disabled *
LAPM protocol disabled * Ignores DTR *
MNP protocol disabled * DSR normal *
Direct mode * DCD normal
DTE flow control disabled * CTS follows RTS *
DCE flow control disabled * RTS/CST delay 0 ms *
XON/XOFF pass through disabled DTE fallback disabled
Inactivity timer off Options retained at disconnect
Break control 0 *
V.42 fast detect disabled *
SPEAKER OPTIONS
Volume low
On until carrier detect
*
Indicates variation from factory option set #1