Telenetics V.3600 Series, User Manual

Page: 109 / 273

Protocols
V.3600 6-9
Break Control — \Kn
Use
\Kn
(
n
= 0-5) to indicate the action taken by the modem when a
break is encountered.
Conditions under which breaks may occur are explained below with
descriptions of the modem's response under the different
\K
command
break options.
A break is sent to the serial port while the modem is in connect state
during a reliable or normal connection (no protocol, data buffered).
A break is sent to the serial port while the modem is in connect state
during a direct connection (no protocol, data not buffered).
Command Operation
\K
Break option 0
\K1
Break option 1
\K2
Break option 2
\K3
Break option 3
\K4
Break option 4
\K5
Break option 5
Command Operation
\K, \K2,
\K4
Enter command mode but do not send break to the remote
modem
\K1
Empty the data buffers and send break to the remote modem
\K3
Immediately send break to the remote modem
\K5
Send break to the remote modem in sequence with any data
received from the serial port
Command Operation
\K, \K2, \K4
Immediately send break to the remote modem and enter
command mode when break is through
\K1, \K3, \K5
Immediately send break to the remote modem