Telenetics V.3600 Series, User Manual

Page: 72 / 273

AT Commands
5-18 V.3600
Note
The communications software package may need
reconfiguring to look for the “Caller Number:” message
prefix so that it knows when to look for a phone number.
When Caller ID is enabled, one of the messages in Table 5-2 appears on
the computer screen after the first RING message:
If the telephone company provides Enhanced Caller ID, the caller's
name appears after the caller phone number.
Distinctive Ring — *DR
If the telephone company is providing distinctive ring service to the
local phone line, the V.3600 can report the type of ring to the DTE.
*
The
data communications software package must allow distinctive ring.
*
Caller ID and Distinctive Ring are compatible only with USA
standards.
Command Operation
*ID Disable Caller ID
*ID1 Enable Caller ID
Table 5-2. Caller ID Message s
The modem sends this message... If:
CALLER<sp>NUMBER:
(505)555-1313 The number was delivered
by the phone company
CALLER<sp>NUMBER:OUT<sp> OF
<sp>AREA The number was not
available from the phone
company
CALLER<sp>NUMBER:PRIVATE Delivery was blocked by
the caller
CALL FAILURE<sp>NUMBER:
ERROR The number was received
in error