Telenetics V.3600 Series, User Manual

Page: 104 / 273

Protocols
6-4 V.3600
Disconnect Buffer Delay — Q%D
Select a delay during which the modem processes data in its transmit
and receive buffers before disconnecting. When a condition exists
which causes a disconnect, the modem tries for
n
seconds to empty its
buffers. When the buffers are empty or if
n
=0, the modem disconnects
immediately.
Serial Port (DTE) Constant Speed — \J
The
\J
command allows DCE and DTE to operate at different speeds.
The
\J1
command forces serial port (DTE) speed to follow data link
speed in any mode.
Table 6-1. Operating Modes and Features
Operating
Mode Error
Correction Data
Compression Flow
Control
Data
Constant
Speed
Interface
Normal Disabled Not
applicable Allowed Buffered On or off
Direct Disabled Not
applicable Not
applicable Not
buffered DTE=DCE
(slaved)
Reliable
(MNP and
LAPM) Enabled On or off Allowed Buffered On
Auto-
reliable
(MNP and
LAPM) Enabled On or off Allowed Buffered On
Command Operation
%D
Disconnect buffer delay disabled
%Dn
Disconnect buffer delay value (
n
= 1-255 seconds)