Telenetics V.3600 Series User Manual Download Page 250

Page: 250 / 273

Flash Upgrade

H-2

V.3600

5) From your terminal software package, send the “flash upgrade

file” to the modem. You know the download is working because
the LCD displays:

FLASH UPGRADE
IN PROGRESS

Note

Be sure you use the “X modem CRC” protocol.

The modem automatically resets after the upgrade is complete. The
process can take several minutes.

One of two messages returns.

DOWNLOAD OK

indicates a successful upgrade.

DOWNLOAD ERROR

indicates a problem with the download.

Enter

ATI3

if you want to verify the latest software update.

Troubleshooting

1) You did not choose the correct download protocol.

Response: Repeat the process.

2) The upgrade flash file is corrupted.

Response: Get a clean file and redo the steps.

3) If all else fails:

Response: See the “Calling Technical Support” section on
page 12-2

Summary of Contents for V.3600 Series


















































































































































































































































































Search results

Summary of Contents for V.3600 Series

Reviews:

Related manuals for V.3600 Series

Brands by name

Popular brands

Telenetics V.3600 Series, User Manual

Search results

Summary of Contents for V.3600 Series

Reviews:

Related manuals for V.3600 Series

Brands by name

Popular brands