Telenetics V.3600 Series, User Manual

Page: 235 / 273

Command Index and Defaults
V.3600 E-31
Factory Option Set #9
(Synchronous V.25bis Dialer) (AT&F9)
MODEM OPTIONS TEST OPTIONS
DCE rate - 33600 Bilateral digital loop disabled
Modulation automode DTE local test disabled
V.34 rate threshold low * DTE remote test disabled
V.34 asymmetric rate disabled * Remote commanded test enabled
Normal originate Test timeout off
Fast train disabled
Auto retrain enabled
DIAL LINE OPTIONS
SQ auto rate disabled Tone dial
Transmit clock internal Auto dial #1
Dial line Wait for dial tone
Jack type RJ11 Wait delay 2 seconds
Line current disconnect long Pause delay 2 seconds
Long space disconnect disabled Call timeout 30 seconds
V.22 guard tone disabled Answer on 1 ring
Autocallback disabled
PROTOCOL OPTIONS
LAPM protocol disabled * DTE OPTIONS
MNP protocol disabled * Sync data *
Direct mode * V.25 SDLC dialer *
DTE flow control disabled * Character type ASCII
DCE flow control disabled * SDLC data format NRZ *
XON/XOFF pass through disabled DTR disconnect *
Inactivity timer off DSR normal *
Break control 0 * DCD normal *
V.42 fast detect disabled * CTS follows RTS *
RTS/CTS delay 0 ms *
DTE fallback disabled
SPEAKER OPTIONS Options retained at disconnect
Volume low
On until carrier detect
*
Indicates variation from factory option set #1