Telenetics V.3600 Series, User Manual

Page: 222 / 273

Command Index and Defaults
E-18 V.3600
S41
RW 10-14 Remote configuration escape
character 3d hex
S42
RW Remote configuration guard time 32 hex
S44
RW DTE XON character 11 hex
S45
RW DTE XOFF character 13 hex
S49
RW DCE XON character 11 hex
S50
RW DCE XOFF character 13 hex
S51
RW Dial transmit level 10
S52
RW 10-16 Lease transmit level 0
S53
RW Bit mapped 0
S54
RW 10-16 Bit mapped 63 hex
S56
RW 10-17 V.42 compression 03 hex
S57
RW Bit mapped 0
S58
RW Inactivity timer 0
S59
RW 10-18 MNP break control 5
S60
RW Bit mapped 5b hex
S61
RO 10-19 DTE word length, parity 18 hex
S62
RW Disconnect buffer delay 0
S63
RW Maximum protocol block size 255
S64
RW 10-20 Auto-reliable character 0
S67
RO Link speed status 0
S69
RW 10-21 Maximum DCE speed 18
S70
RW 10-22 Protocol operating mode 0f hex
S71
RO Protocol operating mode status 0
S72
RW 10-23 Bit mapped 0
S73
RW Password timeout security 0
S74
RW Callback delay 15
S75
RW Callback retry 0
S76
RW 10-24 Callback retry delay 15
S77
RW Lockout threshold 0
S78
RW Autocallback timer 30
S79
RW Break length 35
S80
RO 10-25 Serial port speed 20
S81
RW 10-26 Minimum DCE rate 1
S82
RW Bit mapped 0 hex
S84
RO 10-26 Negotiation status 0
S88
RW Modulation type 0
S-Reg
RO/
RW
Page Function
Default
Factory Set
#1
RO=Read only RW=Read or write