R305 AT Commands
©2011 Telegesis (UK) Ltd
- 10 -
AT Command Manual (Rev 3.05)
2.4 AT Command Overview
The following table gives a quick reference of all commands available.
Command Overview
Module control and configuration
Display Product Identification Information
Software Reset
Restore Factory Defaults
Enter The Bootloader Menu
Clone Local Node To Remote Node (ETRX2 Series Only)
AT+PASSTHROUGH Pass new Firmware Image To Remote Node (ETRX3 Series Only)
AT+RECOVER
Recover From A Failed Clone Attempt
S-Register Access
Remote S-Register Access
Remote S-Register Access
Display All S-Registers
Network control and configuration
Scan The Energy Of All Channels
Scan For Active Pans
Establish Personal Area Network
Join Network
Join Specific Pan
Silent Join
Disassociate Local Device From Pan
Disassociate Remote Node From PAN
(ZDO)
Display Network Information
Display Neighbour Table
(ZDO)
Display Routing Table
(ZDO)
Request Node’s NodeID
(ZDO)
Request Node’s EUI
(ZDO)
Request Node’s Descriptor
(ZDO)
Request Node’s Power Descriptor
(ZDO)
Request Node’s Active Endpoint List
(ZDO)
Request Endpoint’s Simple Descriptor
(ZDO)
Find Nodes which Match a Specific Descriptor
(ZDO)
Announce Local Device in the Network
(ZDO)
Set Source Route To Remote Device
Find The Source Route To A Remote Device
Poll For Data From Parent
Rejoin The Network
Scan Network
Update the Network Key
(ZDO)
Make Local Device the Trust Centre
Make the local device Network Manager
Change the network
’s channel