R305 AT Commands
©2011 Telegesis (UK) Ltd
- 8 -
AT Command Manual (Rev 3.05)
Prompt Overview
DataMODE:<NodeID>,<EUI64>
Datamode has been opened remotely
DataMODE:<NodeID>,<EUI64>,<errorcode>
Response to an attempt to open data mode
OPEN
Data mode is open
CLOSED
Data mode is closed
TRACK:<EUI64 R>,<EUI64 S>,<RSSI>,
<i/o read>,<AD1>,<AD2>,<Vcc>,<S46>
Tracking message: EUIs of receiver and sender,
RSSI, input data, Vcc & S46 counter of sender
TRACK2:<EUI64 R>,<EUI64 S>,<RSSI>,<I/O
read>,<S46>
Tracking message: EUIs of receiver and sender,
RSSI, I/O data, and S46 counter of sender
PWRCHANGE:XXXX
Local node has changed Power Mode to XXXX
AddrResp:<errorcode>[,<NodeID>,<EUI64>]
Response to an address request (also triggered
when finding source routes)
RX:<EUI64>,<NodeID>,<profileID>,
<destinationEndpoint>,<SourceEndpoint>,
<clusterID>,<length>:<payload>
An incoming message not addressed to the AT
command endpoint. EUI64 is only shown if
included in network frame header
NM:ES REPORT WARNING
More than 16 energy scan reports have been
recently received by the network manager
indicating high packet loss
ENTERING BLOAD
Passthrough bootloading has been initiated from
another node
Table 3: Prompt Overview