R305 AT Commands
©2011 Telegesis (UK) Ltd
- 20 -
AT Command Manual (Rev 3.05)
+JPAN
– Join Specific PAN
Execute Command
AT+JPAN:<channel>,<PID or EPID>
Examples
AT+JPAN:20,1234
AT+JPAN:24,0793E14FFB220A38
Use on
All nodes which are not part of a PAN
Notes
This command can only be executed if the
local node is not part of a PAN already.
The JPAN command ignores the channel
mask in register S00 and the PID and EPID
settings in S02 and S03.
Response
JPAN:<channel>,<PID>,<EPID>
OK
or
ERROR:<errorcode>
<errorcode> represents the error code explained in
section 3.
The local node joins a particular PAN on
<CHANNEL> with the specified <PID> or <EPID>
via the remote node with the highest RSSI.
Remote Action
On the Trust Centre / Coordinator
Prompt
NEWNODE:<node EUI64>,<NodeID>,<parent
EUI64>
SW release
R300
+SJN
– Silent Join
Execute Command
AT+SJN:<channel>,<TC EUI64>,
<NM NodeID>,<nwk update ID>
“Silent” joining is joining via the
commissioning method. All data required to
enter the network is provided to the node, so
that no joining procedure itself is required.
The node will appear in the target network
without any joining procedure given the
supplied data is correct.
<channel> is a decimal number
Other parameters are hexadecimal
Use on
All joining Devices
Example
AT+SJN:11,000D6F00000AAAD0,AFFE,00
Response
JPAN:<channel>,<PID>,<EPID>
OK
or
ERROR:<errorcode>
>
<errorcode> represents the error code explained in
section 3.
The local node will become part of the network with
the channel specified in <channel>, the trust centre
EUI64 specified in <TC EUI64>, the NodeID of the
network manager specified in <NM NodeID>, the 8
bit network update ID specified in <nwk update
ID>, the network key provided in S08, the trust
centre link key provided in S09, the PAN ID
provided in S02 and the extended PAN ID provided
in S03. It is assumed that the key-sequence-
number of the network key is 0 when issuing this
command.
SW release
R305