Teledyne T3DMM4-5 User Manual Download

Page: 74 / 113

3. Measuring Capacitance.

Get the method to measure temperature.

4. Math Function.

Introduce how to use the math function while you are measuring.

5. Dual-display Function.

Get the method to use the dual-display function while you are measuring.

6. Saving and Recalling Information.

Introduce how to store and recall the data/parameter/sensors files.

7. Optional Multiple Scan Card.

Get help about operating optional multiple scan cards.

8. The convention and Tips of Softkeys.

Get help about the convention and tips of softkeys.

9. Technical Support.

Get the method to obtain technical support.

Explanation:

●

In the help menu interface, you can move the cursor and select the

corresponding menu by using the up and down direction keys and press”

OK” to read the help information.

●

While reading the help information, you also can look up and down the

information by using up and down direction keys.

Summary of Contents for T3DMM4-5


















































































































Search results

Summary of Contents for T3DMM4-5

Reviews:

Related manuals for T3DMM4-5

Brands by name

Popular brands

Teledyne T3DMM4-5, User Manual

Search results

Summary of Contents for T3DMM4-5

Reviews:

Related manuals for T3DMM4-5

Brands by name

Popular brands