47
6. Press
[
All
]
, the measured value will be shown on the Vice display and the
corresponding value will be shown on the Main display at the same time,
which is convenient for users to observe temperature and voltage values.
Diagram 2- 32 Show Temperature And Voltage Values
7. Press
[
Units
]
to choose the unit of temperature. The Multimeter supports
three units:
°
C,
°
F, K.
Diagram 2- 33 Unit Selection Interface
8. Set the relative value (Optional operation).
Press
[
Rel
]
to open or close the Relative math function. When it is opened,
the reading is a value which comes from the result of actual measurement
value subtracts the relative value that has been set. The default relative
value is the measurement value when the function is opened. For details,
please refer to “Maths Functions” in Chapter 2.
