78
1. How to Set Limits
Select
[
High
]
,
[
Low
]
,
[
Centre
]
or
[
Span
]
and then switch to the required digit
by using the Left or Right Direction keys and input the numerical value by
using the Up and Down Direction keys.
2. Unit
The unit of Limits is decided by the current measurement function.
3. Over hint
●
When the reading is lower than the set lower limit, the colour of the main
display will switch from blue to red.
●
When the reading is higher than the set higher limit, the colour of the main
display will switch from blue to red.
●
When the reading is lower or higher than the set limits, the Beeper will
beep once. (The beeper is turned on.)
The range of Limits function:
●
The upper limit value should always be bigger than the lower limit value.
●
The upper and lower values are stored in volatile memory. They will be set
to default values when the power is on.
