V
The following symbols may appear on the instrument:
CAUTION
Risk of
injury or
damage;
refer to
manual
WARNING
Risk of
electric
shock or
burn
Earth
Ground
Terminal
Protective
Conductor
Terminal
Frame
or
Chassis
Terminal
ON/
Standby
Power
Alternating
Current
Operating Environment
Temperature: 0 °C to 40 °C
Humidity:
5% to 90% relative humidity (non-condensing) up to +30 °C. Upper limit
derates to 50% relative humidity (noncondensing) at +40 °C.
Altitude:
≤ 2000 m
Use indoors only.
Pollution Degree 2.
Use in an operating environment where normally only dry, non-
conductive pollution occurs. Temporary conductivity caused by condensation should
be expected.
AC Power
Input Voltage & Frequency:
100-120 V at 50/60 Hz or
200-240 V at 50/60 Hz
Manual AC selection with a slide switch.
Power Consumption:
20 W maximum
Mains Supply Connector:
CAT II per IEC/EN 61010-1:2010, instrument intended to
be supplied from the building wiring at utilization points (socket outlets and similar).
Fuse Type
Current Input Terminal:
250 VAC F 10 A, 3 AG
AC Mains:
250 VAC F 300 mA, 5x20 mm