92
Example 1: Reading Statistic Functions
Introduce how to realise the statistic function during measuring. When continually
measuring few readings, the Multimeter will update statistic values constantly.
Operating Steps:
1. Press
on the front panel to select the AC Voltage measurement
function and select a voltage range.
2. Connect the red lead to the terminal Input-HI and the black lead to terminal
Input-LO as shown in Diagram 2-9 on page 27.
3. Set the Statistics function parameters.
4. Press
→
[
Statistics
]
to turn on the statistics function.
5. Plug test leads into the circuit and start to measure. Statistics will update
with the acquisition of samples, as the following diagram shows.
Diagram 3- 1 Statistics 1
Diagram 3- 2 Statistics 2
