Teledyne Princeton Instruments PICam 5.x, Programmer'S Manual

Page: 89 / 357

Chapter 5 Configuration APIs 89
PicamParameter_PhosphorType
Reports the type of phosphor used in intensified hardware.
Refer to
Section 5.1.1.24, PicamPhosphorType , on page 94
for additional information.
PicamParameter_PhotocathodeSensitivity Classifies the wavelength sensitivity of the photocathode.
Refer to
Section 5.1.1.25, PicamPhotocathodeSensitivity , on
page 94 for additional information.
PicamParameter_PhotonDetectionMode
Enables/disables photon detection and controls how it is
done via the
PicamPhotonDetectionMode data
enumeration.
Refer to
Section 5.1.1.26, PicamPhotonDetectionMode , on
page 95 for additional information.
PicamParameter_PhotonDetection
Threshold
The threshold, in counts, used to distinguish photons from
background for each pixel.
PicamParameter_PixelBitDepth Reports the size of a data pixel in bits-per-pixel.
PicamParameter_PixelFormat
Controls the format of a data pixel via the
PicamPixelFormat data enumeration.
Refer to Section 5.1.1.27, PicamPixelFormat , on page 95 for
additional information.
PicamParameter_PixelGapHeight
Reports the vertical distance between pixels, in microns.
PicamParameter_PixelGapWidth Reports the horizontal distance between pixels, in microns.
PicamParameter_PixelHeight
Reports the pixel height, in microns.
PicamParameter_PixelWidth Reports the pixel width, in microns.
PicamParameter_ReadoutControlMode
Controls how the sensor is read out via the
PicamReadoutControlMode data enumeration.
Refer to Section 5.1.1.28, PicamReadoutControlMode , on
page 96 for additional information.
PicamParameter_ReadoutCount
Controls the number of readouts to acquire before stopping
the hardware.
NOTE: The hardware may acquire more than the readouts
requested for large requests (i.e., more readouts than
those specified by
PicamParameter_ExactReadoutCount
Maximum
).
NOTE:
This does not include non-destructive readouts from
hardware that supports such a feature.
NOTE:
[Advanced-API Usage Only] The value 0 indicates the
hardware will run forever until explicitly stopped or
an error occurs.
PicamParameter_ReadoutOrientation
Reports the orientation of the data due to readout port
location via the
PicamOrientationMask data enumeration.
Refer to Section 5.1.1.21, PicamOrientationMask , on page 81
for additional information.
PicamParameter_ReadoutPortCount
Controls the number of readout ports from which the
hardware should simultaneously read data.
Table 5-23:
PicamParameter
Enumerator Definitions (Sheet 7 of 11)
Enumerator Description