Teledyne Princeton Instruments PICam 5.x, Programmer'S Manual

Page: 173 / 357

Chapter 5 Configuration APIs 173
5.4.4.6 Picam_GetParameterModulationsConstraint()
Description
Picam_GetParameterModulationsConstraint()
returns intensifier modulation
sequence constraints for a specified constraint category and parameter combination.
Syntax
The syntax for
Picam_GetParameterModulationsConstraint()
is:
PICAM_API Picam_GetParameterModulationsConstraint(
PicamHandle camera,
PicamParameter parameter,
PicamConstraintCategory category,
const PicamModulationsConstraint** constraint);
Input Parameters
Input parameters for
Picam_GetParameterModulationsConstraint()
are:
Output Parameters
Output parameters for
Picam_GetParameterModulationsConstraint()
are:
Advanced API Usage
When used in conjunction with Advanced APIs,
camera
may be a handle to either the:
•
device
, or
•
model
.
Related APIs
For additional information, refer to the following related APIs:
•
Picam_DestroyModulationsConstraints()
.
Related Structures
For additional information, refer to the following parameter structures:
• PicamParameter ;
•
PicamModulationsConstraint
.
camera: Handle for the camera for which constraint information is being
returned.
parameter: Specifies the parameter for which intensifier modulation sequence
constraint information is being requested.
category: Specifies the constraint category for which intensifier modulation
sequence constraint information is being requested.
constraint: Pointer to the allocated array in which the intensifier modulation
sequence constraints for the specified constraint category and
parameter combination are stored.
NOTE: This memory is allocated by PICam and must be released
by calling
Picam_DestroyModulationsConstraints() .