Teledyne Princeton Instruments PICam 5.x, Programmer'S Manual

Page: 90 / 357

90 PICam™ 5.x Programmer’s Manual Issue 11
PicamParameter_ReadoutRateCalculation
Reports the estimated rate of data in readouts-per-second.
NOTE:
If the hardware is being externally triggered, this
represents the fastest possible rate.
PicamParameter_ReadoutStride Reports the length, in bytes, necessary to traverse to the next
readout.
PicamParameter_ReadoutTimeCalculation Reports the duration of time it takes for the hardware to read
out one readout in milliseconds (mS).
PicamParameter_RepetitiveGate Controls the constant gate pulse in nanoseconds (nS).
PicamParameter_RepetitiveModulation
Phase
Controls the constant phase of the intensifier with respect to
the modulation output signal in degrees.
PicamParameter_Rois
Controls the area of the sensor to be digitized via the
PicamRois structure.
Refer to Section 5.2.1.2, PicamRois , on page 109 for
additional information.
PicamParameter_SecondaryActiveHeight
Controls the number of secondary active rows.
PicamParameter_SecondaryMaskedHeight Controls the number of secondary masked rows.
PicamParameter_SensorActiveBottom
Margin
Reports the inactive rows on the bottom.
PicamParameter_SensorActiveExtended
Height
Reports the number of additional active rows that can be
used for storage.
NOTE: These rows cannot be imaged directly.
PicamParameter_SensorActiveHeight Reports the active number of rows.
PicamParameter_SensorActiveLeftMargin
Reports the inactive columns on the left.
PicamParameter_SensorActiveRightMargin Reports the inactive columns on the right.
PicamParameter_SensorActiveTopMargin
Reports the inactive rows on the top.
PicamParameter_SensorActiveWidth Reports the active number of columns.
PicamParameter_SensorAngle
Reports the angle between rays striking the sensor relative to
the sensor normal vector in degrees.
PicamParameter_SensorMaskedBottom
Margin
Reports the number of masked rows akin to active bottom
margin.
PicamParameter_SensorMaskedHeight
Reports the number of masked rows akin to active height.
PicamParameter_SensorMaskedTopMargin Reports the number of masked rows akin to active top
margin.
PicamParameter_SensorSecondaryActive
Height
Reports the number of secondary active rows.
PicamParameter_SensorSecondaryMasked
Height
Reports the number of secondary masked rows.
PicamParameter_SensorTemperature
Reading
Reports the temperature of the sensor in degrees C.
Table 5-23:
PicamParameter
Enumerator Definitions (Sheet 8 of 11)
Enumerator Description