Teledyne Princeton Instruments PICam 5.x, Programmer'S Manual

Page: 134 / 357

134 PICam™ 5.x Programmer’s Manual Issue 11
5.4.1.15 Picam_SetParameterModulationsValue()
Description
Picam_SetParameterModulationsValue()
configures an intensifier modulation
sequence parameter to a specified value during camera setup.
Syntax
The syntax for
Picam_SetParameterModulationsValue()
is:
PICAM_API Picam_SetParameterModulationsValue(
PicamHandle camera,
PicamParameter parameter,
const PicamModulations* value);
Input Parameters
Input parameters for
Picam_SetParameterModulationsValue()
are:
Output Parameters
There are no output parameters associated with
Picam_SetParameterModulationsValue()
Advanced API Usage
When used in conjunction with Advanced APIs,
camera
may be a handle to either the:
•
model
;
The
model
parameter may be set independently from the corresponding
device
parameter. However, doing so requires that all parameters be committed to the
device
prior to starting any data acquisition by calling
Picam_CommitParameters()
.
•
device
.
Setting a
device
parameter automatically sets the corresponding
model
parameter to the same value.
Related Structures
For additional information, refer to the following intensifier modulation sequence
structures:
• PicamModulation ;
• PicamModulations .
Related APIs
For additional information, refer to the following related APIs:
• Picam_CommitParameters()
camera:
Handle for the camera being configured.
parameter: Specifies the Pulse parameter that is to be configured.
Valid parameters are those of type
PicamValueType_Pulse .
value:
The value to which the intensifier modulation sequence parameter is to be
set.