Teledyne Princeton Instruments PICam 5.x, Programmer'S Manual

Page: 132 / 357

132 PICam™ 5.x Programmer’s Manual Issue 11
5.4.1.13 Picam_GetParameterModulationsValue()
Description
Picam_GetParameterModulationsValue()
returns the current value for a specified
intensifier modulation sequence parameter.
Syntax
The syntax for
Picam_GetParameterModulationsValue()
is:
PICAM_API Picam_GetParameterModulationsValue(
PicamHandle camera,
PicamParameter parameter,
const PicamModulations** value);
Input Parameters
Input parameters for
Picam_GetParameterModulationsValue()
are:
Output Parameters
Output parameters for
Picam_GetParameterModulationsValue()
are:
Advanced API Usage
When used in conjunction with Advanced APIs,
camera
may be a handle to either the:
•
device
, or
•
model
.
Stored values for any specific parameter are not necessarily the same for the
device
and
model
instances.
Related Structures
For additional information, refer to the following intensifier modulation sequence
structures:
• PicamModulation ;
• PicamModulations .
Related APIs
For additional information, refer to the following related APIs:
•
Picam_DestroyModulations()
.
camera:
Handle for the camera for which the intensifier modulation sequence
parameter value is being requested.
parameter:
Specifies the intensifier modulation sequence parameter for which the
current value is to be returned.
Valid parameters are those of type
PicamValueType_Modulations .
value:
Pointer to the memory location in which the value of the specified
intensifier modulation sequence parameter is stored.
NOTE: This memory is allocated by PICam and must be released by
calling
Picam_DestroyModulations()