Teledyne Princeton Instruments PICam 5.x, Programmer'S Manual

Page: 300 / 357

300 PICam™ 5.x Programmer’s Manual Issue 11
8.4.3 EM Calibration Parameter Constraints APIs
This section provides programming information about EM Calibration Parameter
Constraint APIs.
8.4.3.1
PicamEMCalibration_GetSensorTemperatureSetPointConstraint()
Description
PicamEMCalibration_GetSensorTemperatureSetPointConstraint()
returns an
allocated constraint in which the set of valid temperature set points, in degrees Celsius,
for a specified camera is stored.
Syntax
The syntax for
PicamEMCalibration_GetSensorTemperatureSetPointConstraint()
is:
PICAM_API PicamEMCalibration_GetSensorTemperatureSetPointConstraint(
PicamHandle calibration,
const PicamRangeConstraint** constraint);
Input Parameters
Input parameters for
PicamEMCalibration_GetSensorTemperatureSetPointConstraint()
are:
Output Parameters
Output parameters for
PicamEMCalibration_GetSensorTemperatureSetPointConstraint()
are:
Related APIs
For additional information, refer to the following related APIs:
• Picam_DestroyHandles() .
Related Structures
For additional information, refer to the following related APIs:
• PicamRangeConstraint .
calibration:
Handle for the camera for which the valid range of temperature set
points is to be returned.
constraint:
Pointer to the allocated constraint in which the set of valid
temperature set points is stored.
NOTE: This memory is allocated by PICam and must be released
by calling
Picam_DestroyCollectionConstraints()