Teledyne Princeton Instruments PICam 5.x, Programmer'S Manual

Page: 138 / 357

138 PICam™ 5.x Programmer’s Manual Issue 11
5.4.1.19 Picam_GetParameterModulationsDefaultValue()
Description
Picam_GetParameterModulationsDefaultValue()
returns the default value for a
specified intensifier modulation sequence parameter.
Syntax
The syntax for
Picam_GetParameterModulationsDefaultValue()
is:
PICAM_API Picam_GetParameterModulationsDefaultValue(
PicamHandle camera,
PicamParameter parameter,
const PicamModulations** value);
Input Parameters
Input parameters for
Picam_GetParameterModulationsDefaultValue()
are:
Output Parameters
Output parameters for
Picam_GetParameterModulationsDefaultValue()
are:
Advanced API Usage
When used in conjunction with Advanced APIs,
camera
may be a handle to either the:
•
device
, or
•
model
.
Both the
device
and
model
share the same default value.
Related Structures
For additional information, refer to the following intensifier modulation sequence
structures:
• PicamModulation ;
• PicamModulations .
Related APIs
For additional information, refer to the following related APIs:
•
Picam_DestroyModulations()
.
camera:
Handle for the camera for which the default parameter value is being
requested.
parameter:
Specifies the intensifier modulation sequence parameter for which
the default value is to be returned.
Valid parameters are those of type
PicamValueType_Modulations
.
value: Pointer to the memory location in which the default value for the
specified intensifier modulation sequence parameter has been
stored.
NOTE: This memory is allocated by PICam and must be released
by calling
Picam_DestroyModulations() .