Teledyne Princeton Instruments PICam 5.x, Programmer'S Manual

Page: 102 / 357

102 PICam™ 5.x Programmer’s Manual Issue 11
5.1.1.39 PicamTriggerStatus
Data Type
PicamTriggerStatus
is defined as
enum
.
Description
PicamTriggerStatus
is the presence of an external trigger source.
Enumerator Definitions
Refer to Table 5-39 for enumerator definitions.
5.1.1.40 PicamTriggerTermination
Data Type
PicamTriggerTermination
is defined as
enum
.
Description
PicamTriggerTermination
is the set of input terminations provided by the hardware
for an external trigger source.
Enumerator Definitions
Refer to Table 5-40 for enumerator definitions.
5.1.1.41 PicamVacuumStatus
Data Type
PicamVacuumStatus
is defined as
enum
.
Description
PicamVacuumStatus
reports the status of the vacuum chamber containing the sensor.
Enumerator Definitions
Refer to Table 5-41 for enumerator definitions.
Table 5-39:
PicamTriggerStatus
Enumerator Definitions
Enumerator Description
PicamTriggerStatus_NotConnected
No trigger source is connected.
PicamTriggerStatus_Connected A trigger source is connected.
Table 5-40:
PicamTriggerTermination
Enumerator Definitions
Enumerator Description
PicamTriggerTermination_FiftyOhms
The trigger terminates into 50 ohms.
PicamTriggerTermination_HighImpedance The trigger terminates into very high
impedance.
Table 5-41:
PicamVacuumStatus
Enumerator Definitions
Enumerator Description
PicamVacuumStatus_Sufficient The chamber has sufficient vacuum.
PicamVaccuumStatus_Low
The chamber has low or no vacuum.