Teledyne Princeton Instruments PICam 5.x, Programmer'S Manual

Page: 60 / 357

60 PICam™ 5.x Programmer’s Manual Issue 11
4.3.3 Information APIs
This section provides programming information for camera and accessory Information
APIs.
4.3.3.1
Picam_DestroyFirmwareDetails()
Description
Picam_DestroyFirmwareDetails()
releases memory that has been allocated for
use by the
firmware_array
.
NOTE:
firmware_array
may be a single
PicamFirmwareDetail
allocated by PICam.
If
firmware_array
is a null array, calling
Picam_DestroyFirmwareDetails()
has no
effect.
Syntax
Picam_DestroyCalibrations()
The syntax for
Picam_DestroyFirmwareDetails()
is:
PICAM_API Picam_DestroyFirmwareDetails(
const PicamFirmwareDetail* firmware_array);
Input Parameters
Input parameters for
Picam_DestroyFirmwareDetails()
are:
Output Parameters
There are no output parameters associated with
Picam_DestroyFirmwareDetails()
.
Related APIs
For additional information, refer to the following related APIs:
• Picam_GetFirmwareDetails()
firmware_array:
Pointer to the memory location where the array is stored.