Teledyne 100E Instruction Manual Download Page 17

Page: 17 / 258

Model 100E Instruction Manual

M100E Documentation

045150102 Rev XB1

1. M100E DOCUMENTATION

Thank you for purchasing the Model 100E UV Fluorescence SO

Analyzer!

The documentation for this instrument is available in several different formats:

Printed format, part number 045150100

Electronic format on a CD-ROM, part number 045150200

The electronic manual is in Adobe

Systems Inc. “Portable Document Format”. The

Adobe

Acrobat Reader

software, which is necessary to view these files, can be

downloaded for free from the internet at http://www.adobe.com/.

The electronic version of the manual has many advantages:

•

Keyword and phrase search feature

•

Figures, tables and internet addresses are linked so that clicking on the item will
display the associated feature or open the website.

•

A list of chapters and sections as well as thumbnails of each page are displayed to

the left of the text.

•

Entries in the table of contents are linked to the corresponding locations in the
manual.

•

Ability to print sections (or all) of the manual

Additional documentation for the Model 100E UV Fluorescence SO

Analyzer is available

from T-API’s website at http://www.teledyne-api.com/manuals/

•

APICOM software manual, part number 03945

•

Multi-drop manual, part number 01842

•

DAS Manual, part number 02837.

Summary of Contents for 100E



































































































































































































































































Search results

Summary of Contents for 100E

Reviews:

Teledyne 100E, Instruction Manual, Page: 17 / 258

Search results

Summary of Contents for 100E

Reviews: