Installation instructions
│
T24
│
Chapter 9: Configuration menu
9.1 4 Erase RFID tags
1. Make sure that the
Stop
button is pressed.
2. Twist and release the
Stop
button.
The initial start-up logo is displayed.
Battery indicator(s) light(s).
The
display shows:
[Session Selection]
3. Enter
Menu mode
(see
"9.2 Enter Menu mode (no PIN code required) "
).
4. Navigate to the
[Startup Protection – RFID Erase]
menu using the
Up/Down
buttons.
5. Press the
Select
button to enter.
The display shows:
[Select a single item]
and the list showing the
registered RFID tags' ID numbers.
6. Choose the RFID tag to be erased using the
Up/Down
buttons.
7. Press the
Select
button to select.
A + sign is displayed in front of the selected item.
8. Press the
Back
button to accept.
The display shows:
[Confirmed]
.
The display returns to the menu list.
*To check that the RFID tag has been properly erased, see
, steps 1–6.
IM-PM-TX101-EN-v08
65
