Installation instructions
│
T24
│
Chapter 2: Safety
l
Always test the transmitter stop button before operating it.This test
should be done on each shift, without a load. See
l
Never use a transmitter if the stop button is mechanically
damaged.Contact your supervisor or representative for service
immediately.
l
Never leave the transmitter unattended.
l
Always switch the transmitter off when not in use. Store in a safe
place.
l
Keep a clear view of the work area at all times.
2 .1 .3 MA I N T EN A N C E
Before maintenance intervention on any remote controlled equipments:
• always remove all electrical power from the equipment.
• always follow lockout procedures.
l
Keep the safety information for future reference. Always download the
Installation instructions from our website, www.tele-radio.com, for the latest
available version.
l
If error messages are shown, it is very important to find out what caused
them. Contact your representative for help.
l
The functionality of the stop button should be tested at least after every 200
hours’ use (see
).
l
If the stop button is mechanically damaged, do not use the transmitter.
Contact your supervisor or representative for service immediately.
l
Keep the product in a clean, dry place.
l
Keep contacts and antennas clean.
l
Wipe off dust using a clean, slightly damp cloth.
l
Never use cleaning solutions.
l
Check the encapsulation, foils and cable for damages. If the encapsulation or
foil is damaged, moisture can cause serious damage to the electronics.
IM-PM-TX101-EN-v08
13
