Installation instructions
│
T24
│
Chapter 2: Safety
2 .2 S af ety f eatu res
2 .2 .1 S T O P B UT T O N
When the
Stop
button is pressed, the safety relays on the
receiver deactivate, unless otherwise stated in the
corresponding technical documentation provided with each
customized system.
IMPORTANT! Always use the Stop button in an emergency.
Fig. 1 Example of possible locations for the stop button. Here on the right side of a
T24 transmitter.
IMPORTANT! The Stop button should always be tested before operating the
transmitter. This test should be done on each shift, without a load.
To test the stop button:
1. Press the
Stop
button.
2. Twist and release the
Stop
button.
14
IM-PM-TX101-EN-v08
