Installation instructions
│
T24
│
Chapter 8: Operation
8 .7 Log the transmitter ou t f rom a receiver
A transmitter already logged in to the receiver has to be logged out before any
other transmitter can be logged in.
NOTE: Logout can only be performed when the transmitter is on and a radio link
with one or more receivers has been established. The receiver must be powered-
up for the logout procedure to be successful.
NOTE: The logout procedure will log the transmitter out from all receivers that
are part of the radio session.
8 .7 .1 S O F T W A RE V ERS I O N S W 0 0 3 3 -1 1 V 1 0 O R H I G H ER
1. Press and hold side button
SB4
.
2. Press the
Stop
button.
The display shows:
[Logging out…] and [Logout successful]
3. Release side button
SB4
.
The transmitter turns off.
8 .7 .2 S O F T W A RE V ERS I O N S W 0 0 3 3 -1 1 V 0 9 O R L O W ER
1. Press and hold both
Start
buttons simultaneously.
2. Press the
Stop
button.
The display shows:
[Logging out…] and [Logout successful]
3. Release both
Start
buttons.
The transmitter turns off.
8 .8 S witch the transmitter of f
When the transmitter is active and the stop button is pressed, all relays on the
receiver deactivate.
NOTE: When the transmitter is switched off, it remains logged in to the receiver(s).
To log out, see
"8.7 Log the transmitter out from a receiver"
1. Press the
Stop
button.
The display shows:
[End session successful]
The transmitter turns off. All relays on the receiver deactivate.
46
IM-PM-TX101-EN-v08
