Tele Radio T24-01, Installation Instructions Manual

Page: 48 / 108

Installation instructions
│
T24
│
Chapter 9: Configuration menu
CHAPTER 9: CONFIGURATION MENU
9.1 M enu mode and standard settings
The Menu mode allows for certain settings to be set directly from the transmitter.
Once in Menu mode , the following menus will be available.
Menu Description
–
[Register
Select a location to register a new receiver in. Radio
communication is immediately enabled when the
registration is confirmed.
–
[Erase]
Select a registered receiver to be erased from the
transmitter.
–
[Replace]
Select a registered receiver to be replaced.
–
[Clear blocked
input]
Reset any blocked input.
–
[Radio Channel]
Select the channel/bank to use.
–
[Backlight
Intensity]
Set the display luminosity (in %).
–
[Buzzer Volume]
Set the buzzer volume level (in %).
–
[Radio Inactivity
Timeout]
Set the off delay ( in s) before the transmitter
automatically switches off.
–
[Time Zone]
Select the time zone (UTC +/- 14 h).
–
[Startup protection
– RFID Learn]
Register one or more RFID tags in the transmitter for
start up protection.
–
[Startup protection
– RFID Erase]
Erase one or more registered RFID tag from the
transmitter.
–
[Repeater
Configuration]
Set the position number of a repeater (slot ID) when
used in a chain of repeaters.
–
[Show device
information]
Display the unit's serial number and a list of the
software versions currently installed on the
transmitter.
–
[Show BLOB info]
Display BLOB information.
–
[Start RFID Test]
For testing the registered RFID tags.
For more information about the menu navigation, see "8.2 General navigation" .
48 IM-PM-TX101-EN-v08