Installation instructions
│
T24
│
Chapter 8: Operation
Display button Side button
Action
Back
SB2
(Back)
Cancel and go back to the menu without
confirmation
Up/Down
SB3
and
SB4
(Up/Down)
Increase/decrease the value displayed
8 .2 .3 S EL EC T A L O C A T I O N
Display button Side button
Action
Select
SB1
(Select)
Select/deselect the current location.
Selected elements are indicated by a + sign on
the left of the selection.
Back
SB2
(Back)
Accept currently selected slots
Up/Down
SB3
and
SB4
(Up/Down)
Move through the location list.
8 .3 S tart- u p protection
RFID tags can be activated to prevent unauthorized personnel from operating the
transmitter. To activate the RFID functions, contact your representative for
assistance.
Once the RFID start-up protection functions have been activated, RFID tags need to
be registered in the transmitter before they can be used.
If the RFID start-up protection functions have been activated but no RFID tag has
been registered, this will be indicated on the display with the following warning
message:
[There are no RFID stored in the settings. Register tags in the
config menu.]
Once RFID tags have been registered, the display will show:
[Waiting for a valid
tag to be presented…]
each time the transmitter is started.
To register a RFID tag, see
IM-PM-TX101-EN-v08
41
