Installation instructions
│
T24
│
Chapter 9: Configuration menu
9.1 3 Register RFID tags
NOTE: If the RFID functions are not activated, contact your representative for
assistance.
1. Make sure that the
Stop
button is pressed.
2. Twist and release the
Stop
button.
The initial start-up logo is displayed.
Battery indicator(s) light(s).
The
display shows:
[Session Selection]
3. Enter
Menu mode
(see
"9.2 Enter Menu mode (no PIN code required) "
).
4. Navigate to the
[Startup Protection – RFID Learn]
menu using the
Up/Down
buttons.
5. Press the
Select
button to enter.
The display shows:
[Select a single item]
and the list showing the
registered RFID tags' ID numbers.
6. Choose a location for the RFID tag to be registered in using the
Up/Down
buttons.
7. Press the
Select
button to select.
A + sign is displayed in front of the selected location.
8. Press the
Back
button to accept.
The display shows:
[Waiting for a valid tag to be presented…]
9. Place the RFID tag against the RFID symbol located under the transmitter
housing, next to battery compartment 1.
l
If successfully completed:
The buzzer emits 3 short beeps. The display returns to the menu list.
l
If no tag is presented within 20 s:
The transmitter turns off.
IM-PM-TX101-EN-v08
63
