Installation instructions
│
T24
│
Chapter 9: Configuration menu
9.1 .1 MEN U MO DE PRO T EC T I O N
PIN codes can be activated to prevent unauthorized personnel from entering the
Menu mode
. To activate the PIN code functions, contact your representative for
assistance. All PIN code settings require assistance.
The
Menu mode
can be protected by PIN codes with different access levels (ex:
standard and admin). Once the protection functions have been activated, a PIN
code will always be required for accessing the
Menu mode
.
NOTE: Default PIN code for the standard access level is 1234.
9.2 Enter M enu mode (no PIN code requ ired)
9.2 .1 S O F T W A RE V ERS I O N S W 0 0 3 3 -1 1 V 1 0 O R H I G H ER
1. Make sure that the
Stop
button is pressed.
2. Twist and release the
Stop
button.
The initial start-up logo is displayed.
Battery indicator(s) light(s).
The
display shows:
[Session Selection]
3. Press and hold side button
SB3
.
4. Press the
Stop
button.
5. Release
SB3
.
The display shows the menu list.
6. Select a menu by using the
navigation
and
function
buttons on the
transmitter display or side buttons
SB1–4
(see
).
9.2 .2 S O F T W A RE V ERS I O N S W 0 0 3 3 -1 1 V 0 9 O R L O W ER
1. Make sure that the
Stop
button is pressed.
2. Twist and release the
Stop
button.
The initial start-up logo is displayed.
Battery indicator(s) light(s).
The
display shows:
[Session Selection]
3. Press and hold side button
SBX2
(middle button on the right side of the
transmitter).
4. Press the
Stop
button.
5. Release side button
SBX2
.
The display shows the menu list.
6. Select a menu by using the
navigation
and
function
buttons on the
transmitter display or side buttons
SB1–4
(see
).
IM-PM-TX101-EN-v08
49
