Tektronix TDS5054, User Manual

Page: 28 / 361

Installation
TDS5000 Series User Manual
1- 7
CAUTION.
To avoid product damage, shut down the oscilloscope and disconnect
the power cord from the power source before connecting any accessories. A USB
mouse, keyboard, or other USB device can be connected or disconnected with
the power on. See
Shutting Down the Oscilloscope on page 1--9.
Mouse
Keyboard
Ethernet
Centronics Printer
GPIB
Scope VGA Output
USB
PC SVGA Output
RS-232
Audio line out
Audio line in
Microphone in
Timebase reference input
(EXT REF)
Trigger signal output
(AUX OUT)
CH 3 signal outpuT
(SIGNAL OUT)
USB*
*These connectors are on later model insturments only.
Figure 1- 1: Locations of connectors on side and rear panels
Table 1- 2: Additional accessory connection information
Item Description
Monitor If you use a nonstandard monitor, you may need to change the
Windows 2000 display settings to achieve the proper resolution
for your monitor.
Printer Connect an external printer to the Centronics parallel port
connector directly. If your printer has a DB-25 connector, use
the adapter cable that came with your printer. For information
on printer usage, see
Printing Waveforms on page 3--205.