Tektronix TDS5054, User Manual

Page: 259 / 361

Data Input and Output
3- 192
TDS5000 Series User Manual
Use the procedure that follows to recall a waveform to a reference. You can only
recall waveforms into references.
NOTE
. Reference waveforms cannot be recalled because they are already resident
on the oscilloscope. However, you can copy a reference waveform to another
reference: first display the reference to be copied, and then use the Saving a
Waveform procedure (page 3--190) to save it to another reference (Ref1-Ref4).
Overview To recall a waveform Control elements and resources
Prerequisites 1. The oscilloscope must be powered up. You must have
access to a waveform saved by the oscilloscope.
See Powering On the
Oscilloscope
on page
1--8, and Saving a Waveform on page 3--190
Display the
Reference
Setup control
window
2. From the toolbar, click Refs and select the tab of the
reference into which you want to recall the waveform.
Recall the
waveform 3. If recalling an internal reference, click Display to toggle
the display of the reference waveform on.
Recalling A Waveform