![background image](http://html1.mh-extra.com/html/tektronix/tds1001c-edu/tds1001c-edu_service-manual_1078404050.webp)
Performance Veri
fi
cation
4.
Set the power supply to the 1.8 V value shown in column A, the Approximate
Test Voltage.
5.
Adjust the vertical position knob for the DC line to position the line in the
center of the screen.
6.
Enter the voltage on the voltmeter and on the oscilloscope into the spreadsheet
in the appropriate columns, B and C.
7.
Repeat steps 4 through 6 for the values of 1.76 V through 0 V.
8.
Swap the connections to the positive terminal of the power supply with those
at the negative terminal as shown in the following
fi
gure:
9.
Repeat steps 4 through 6 for the values of -0.04 V through -1.8 V.
10.
Enter the Minimum Margin number (cell I16) for the channel tested in the
test record.
11.
Repeat steps 1 through 10 for all input channels.
38
TDS2000C and TDS1000C-EDU Series Oscilloscope Service Manual
Summary of Contents for TDS1001C-EDU
