Tektronix TDS1001C-EDU, Service Manual

Page: 27 / 114

Speci fi cations
Mechanical Characteristics
Table 8: Mechanical characteristics
Characteristic Description
Weight Requirements that follow are nominal:
2.0 kg (4.4 lbs), stand-alone instrument
2.2 kg (4.9 lbs), with accessories
3.6 kg (8 lbs), when packaged for domestic shipment
Height
158 mm (6.22 in)
Width 326.3 mm (12.85 in)
Size
Depth 124.1 mm (4.88 in)
Cooling Method Convection cooled
Environmental Performance
Table 9: Environmental performance
Characteristic Description
Operating 0° C to +50° C (32 °F to 122 °F), with 5° C/minute maximum gradient,
noncondensing, up to 3000 m altitude Temperature
Nonoperating -40° C to +71° C (-40 °F to 159.8 °F), with 5° C/minute maximum gradient
Operating 5% to 85% relative humidity (% RH) at up to +40° C
5% to 45% RH above +40° C up to +50° C, noncondensing, and as limited
by a Maximum Wet-Bulb Temperature of +37° C (derates relative humidity
to 45 % RH at +50° C) Humidity
Nonoperating
5% to 85% relative humidity (% RH) at up to +40° C
5% to 45% RH above +40° C up to +50° C, noncondensing.
Above +50° C limited by a Maximum Wet-Bulb Temperature of +37° C
(derates relative humidity to 12% RH at +71° C)
Operating Up to 3000 meters (10,000 feet) Altitude
Nonoperating Up to 3000 meters (10,000 feet).
Altitude is limited by possible damage to the LCD at higher altitudes. This
damage is independent of operation
Data Logging System Characteristics (Not Available on TDS1000C-EDU Models)
NOTE. This software feature directs the oscilloscope to automatically collect
data over a period of time. After you con fi gure the trigger conditions to use,
you can use the data logging menu to set up the oscilloscope so that it will save
all of the triggered waveform to a USB memory device, within a time duration
that you have set.
TDS2000C and TDS1000C-EDU Series Oscilloscope Service Manual 15