Tektronix TDS1001C-EDU, Service Manual

Page: 100 / 114

Replaceable Parts
These modules cost signi fi cantly less than new modules and meet the same factory
speci fi cations. For more information about the module exchange program, call
1-800-833-9200 and select option 2.
New modules.
You may purchase replacement modules in the same way as other
replacement parts.
Using the Replaceable Parts List
This section contains a list of the mechanical and/or electrical components that are
replaceable for the oscilloscope. Use this list to identify and order replacement
parts. The following table describes each column in the parts list.
Table 27: Replaceable parts list
Column Column name Description
1 Figure & Index Number Items in this section are referenced by
fi gure and index numbers to the exploded
view illustrations that follow.
2 Tektronix Part Number Use this part number when ordering
replacement parts from Tektronix.
3 and 4 Serial Number Column three indicates the serial number at
which the part was
fi rst effective. Column
four indicates the serial number at which the
part was discontinued. No entries indicates
the part is good for all serial numbers.
5
Qty This indicates the quantity of parts used.
6
Name & Description An item name is separated from the
description by a colon (:). Because of space
limitations, an item name may sometimes
appear as incomplete. Use the U.S. Federal
Catalog handbook H6-1 for further item
name identi
fi cation.
Abbreviations Abbreviations conform to American National Standard ANSI Y1.1-1972.
88 TDS2000C and TDS1000C-EDU Series Oscilloscope Service Manual