Tektronix TDS1001C-EDU, Service Manual

Page: 39 / 114

Performance Veri fi cation
This chapter contains performance veri fi cation procedures for the speci fi cations
marked with the check mark. The following equipment, or a suitable equivalent,
is required to complete these procedures.
Required Equipment
Table 12: Performance veri fi cation
Description Minimum requirements Examples
DC Voltage Source 17.5 mV to 7 V, ±0.5% accuracy
Leveled Sine Wave Generator 50 kHz and 200 MHz, ±3% amplitude accuracy
Time Mark Generator 10 ms period, ±10 ppm accuracy
Wavetek 9100 Universal Calibration
System with Oscilloscope Calibration
Module (Option 250)
Fluke 5500A Multi-product Calibrator with
Oscilloscope Calibration Option (Option
5500A-SC)
50 Ω BNC Cable BNC male to BNC male, ≈ 1 m (36 in) long Tektronix part number 012-0482-XX
50 Ω BNC Cable BNC male to BNC male, ≈ 25 cm (10 in) long Tektronix part number 012-0208-XX
50 Ω Feedthrough Termination BNC male and female connectors Tektronix part number 011-0049-XX
Dual Banana to BNC Adapter Banana plugs to BNC female Tektronix part number 103-0090-XX
BNC T Adapter BNC male to dual BNC female connectors Tektronix part number 103-0030-XX
Splitter, Power Frequency range: DC to 4 GHz.
Tracking: >2.0% Tektronix part number 015-0565-XX
Adapter (four required) Male N-to-female BNC Tektronix part number 103-045-XX
Adapter Female N-to-male BNC Tektronix part number 103-0058-XX
Leads, 3 Black Stacking Banana Plug Patch Cord, ≈ 45 cm
(18 in) long
Pomona #B-18-0
Leads, 2 Red Stacking Banana Plug Patch Cord, ≈ 45 cm
(18 in) long
Pomona #B-18-2
TDS2000C and TDS1000C-EDU Series Oscilloscope Service Manual 27