Performance Veri
fi
cation
2.
Connect the oscilloscope channel under test to the leveled sine wave generator
as shown in the following
fi
gure:
3.
Set the oscilloscope
Vertical Scale
(volts/division) to
500 mV/div
.
4.
Set the oscilloscope
Horizontal Scale
(seconds/division) to
25 ns/div
.
5.
Set the leveled sine wave generator frequency to
10 MHz
.
6.
Set the leveled sine wave generator output level to approximately
500 mV
p-p
so that the measured amplitude is approximately
500 mV
. (The measured
amplitude can
fl
uctuate around 500 mV.)
7.
Push
Set To 50%
. Adjust
Trigger Level
as necessary and then check that
triggering is stable.
8.
Set the leveled sine wave generator frequency to:
40 MHz
if you are checking a TDS1001C-EDU
50 MHz
if you are checking a TDS2001C
60 MHz
if you are checking a TDS1002C-EDU
70 MHz
if you are checking a TDS2002C, or TDS2004C
100 MHz
if you are checking a TDS1012C-EDU, TDS2012C, TDS2014C,
TDS2022C, or TDS2024C
9.
Set the oscilloscope
Horizontal Scale
(seconds/division) to
5 ns/div
.
10.
Set the leveled sine wave generator output level to approximately
750 mV
p-p
so that the measured amplitude is approximately
750 mV
. (The measured
amplitude can
fl
uctuate around 750 mV.)
11.
Push
Set To 50%
. Adjust
Trigger Level
as necessary and then check that
triggering is stable.
12.
For the TDS2022C and TDS2024C models, set the frequency to 200 MHz,
and increase the amplitude to 1 V
p-p
. Verify stable triggering.
13.
Set the oscilloscope
Horizontal Scale
(seconds/division) to
2.5 ns/div
.
14.
Change the oscilloscope setup using the following table:
34
TDS2000C and TDS1000C-EDU Series Oscilloscope Service Manual
Summary of Contents for TDS1001C-EDU
