Tektronix TDS1001C-EDU, Service Manual

Page: 28 / 114

Speci fi cations
Table 10: Data logging system characteristics (not available on TDS1000C-EDU models)
Characteristic Description
Duration The time period.
30 min, 1 hour, 1.5 hour, 2 hour, 2.5 hour, 3 hour, 3.5 hour, 4 hour, 4.5 hour, 5 hour, 5.5 hour, 6 hour, 6.5
hour, 7 hour, 7.5 hour, 8 hour.
Source The signal source which you want to save the waveform.
Channel 1, Channel 2, Channel 3, Channel 4, Math
Select Folder The fi le folder where you save the waveform data.
You can create the new folder or change the existing folder as the folder where you want to save the
waveform data.
Limit Testing System Characteristics (Not Available on TDS1000C-EDU Models)
NOTE.
This software feature directs the oscilloscope to monitor an active input
signal against a template and to output pass or fail results by judging whether
the input signal is within the bounds of the template.
Table 11: Limit testing system characteristics (not available on TDS1000C-EDU models)
Characteristic Description
Source The signal source which you want to do the limit testing.
Channel 1, Channel 2, Channel 3, Channel 4, Math
Compare Ref Channel The reference channel # where the template is saved.
RefA, RefB, RefC, RefD. The limit testing system will compare the source signal with this template.
Run/Stop To enable or disable the limit testing function.
Run, Stop.
Template Setup You can use this menu item to set up a limit test waveform template. The template is the mask signal that
you de
fi ne as the boundary to compare with the input source signal. You can create the template from
internal or external waveforms with speci fi c horizontal and vertical tolerances.
Source The location of the signal source that is used to create the limit test template.
Channel 1, Channel 2, Channel 3, Channel 4, Math
Vertical Limit The vertical limit in vertical divisions.
0~1000 mdiv
Horizontal Limit The horizontal limit in horizontal divisions.
0~500 mdiv.
Destination Ref Channel The location of the reference memory location that is used to store the limit test template.
RefA, RefB, RefC, RefD.
Display Template Displays or does not display a stored test template.
On, Off.
16 TDS2000C and TDS1000C-EDU Series Oscilloscope Service Manual