Tektronix TDS 410A, Programming Manual

Page: 41 / 382

Command Groups
TDS Family Oscilloscope Programmer Manual
2–23
itself to the state it was in when you originally saved that setting. Table 2–17
lists these commands.
Table 2–17: Save and Recall Commands
Header Description
Return number of allocated and unallocated
data points
Return number of allocated data points
Return number of unallocated data points
!
Specify the number of allocated data points
Delete stored setup
Delete stored waveform
Recall settings
Recall saved instrument settings
(File System only)
Recall saved waveform
Save settings
Save instrument settings
Save waveform
(TDS 4XXA & 7XXA only)
Specifies the file format for saved waveforms
Status and Error Commands
Table 2–18 lists the status and error commands the digitizing oscilloscope
supports. These commands let you determine the status of the digitizing
oscilloscope and control events.
Several commands and queries used with the digitizing oscilloscope are common
to all devices on the GPIB bus. IEEE Std 488.2–1987 defines these commands
and queries. They begin with an asterisk (
).
Table 2–18: Status and Error Commands
Header Description
Return all events
Return scope status
Clear status